Community
Changing the default port.
Links used in this discussion
Links used in this discussion
Алексей Семенов,
User (Posts: 6)
Sep 28, 2021 10:13:01 am EDT
Support level: Free or trial
Pauline,
Support (Posts: 2878)
Sep 28, 2021 4:23:11 pm EDT
Hello Alexey,
Thank you for your message.
Please double-check if the Server is visible from the outside at the port 4000. In order to do so please navigate to this page, input the Server's port number and select Check Port. If everything was configured properly and Server is visible at this specific port the form will return Success as the result.
Hope that helps.
Thank you for your message.
Please double-check if the Server is visible from the outside at the port 4000. In order to do so please navigate to this page, input the Server's port number and select Check Port. If everything was configured properly and Server is visible at this specific port the form will return Success as the result.
Hope that helps.
Алексей Семенов,
User (Posts: 6)
Sep 29, 2021 2:33:48 am EDT
Support level: Free or trial
Pauline,
Support (Posts: 2878)
Sep 29, 2021 2:13:50 pm EDT
Hello Alexey,
Thank you for the clarification.
Could you please also let us know if you've tried restarting the RU Server or the server machine after adding the port 4000 (or any other custom port value) to the Communication ports list? If no then please try adding the custom port value to the Communication ports list once again and then restarting the RU Server (please see Configuration -> Service state tab) or the server machine itself and see if this helps to resolve the issue.
Hope that helps.
Thank you for the clarification.
Could you please also let us know if you've tried restarting the RU Server or the server machine after adding the port 4000 (or any other custom port value) to the Communication ports list? If no then please try adding the custom port value to the Communication ports list once again and then restarting the RU Server (please see Configuration -> Service state tab) or the server machine itself and see if this helps to resolve the issue.
Hope that helps.
Алексей Семенов,
User (Posts: 6)
Sep 29, 2021 2:30:21 pm EDT
Support level: Free or trial
restarted it. it didn't help.
Pauline,
Support (Posts: 2878)
Sep 29, 2021 4:35:02 pm EDT
Hello Alexey,
In this case could you please provide us the RU Server log files as well as Host log files for examination? You can send the log files to support@remoteutilities.com.
Looking forward to your reply.
In this case could you please provide us the RU Server log files as well as Host log files for examination? You can send the log files to support@remoteutilities.com.
Looking forward to your reply.
Алексей Семенов,
User (Posts: 6)
Sep 29, 2021 4:56:46 pm EDT
Support level: Free or trial
I sent the logs.They are almost empty. but after looking at the logs.
I saw that when restarting the server, it does not listen to other ports.
although the port is specified
13-44-17 29-09-2021 T: Server starting. Version: 3.0.1.0 (3010)
13-44-17 29-09-2021 T: Listen 5655 port.
13-44-17 29-09-2021 T: Server started.
I saw that when restarting the server, it does not listen to other ports.
although the port is specified
13-44-17 29-09-2021 T: Server starting. Version: 3.0.1.0 (3010)
13-44-17 29-09-2021 T: Listen 5655 port.
13-44-17 29-09-2021 T: Server started.
Edited:Алексей Семенов - Sep 29, 2021 4:59:06 pm EDT
Pauline,
Support (Posts: 2878)
Sep 29, 2021 5:03:11 pm EDT
Hello Alexey,
Thank you for the provided log files.
I'll forward the issue along with the log files to our development department and will ask for their input on this.
I'll get back to you with an update on this shortly.
Thank you for the provided log files.
I'll forward the issue along with the log files to our development department and will ask for their input on this.
I'll get back to you with an update on this shortly.
Алексей Семенов,
User (Posts: 6)
Sep 29, 2021 5:22:46 pm EDT
Support level: Free or trial
the question is removed.
I found out what the problem was.
If you do not close the config, it does not update the parameters.
And restarting from the config does not update these parameters either.
It was necessary to make changes, completely close the config console. and restart the server.
I feel stupid)
I found out what the problem was.
If you do not close the config, it does not update the parameters.
And restarting from the config does not update these parameters either.
It was necessary to make changes, completely close the config console. and restart the server.
I feel stupid)
Алексей Семенов,
User (Posts: 6)
Sep 29, 2021 5:24:42 pm EDT
Support level: Free or trial
and if you restart the server without closing the config, it will reset everything to the previous values.
* Website time zone: America/New_York (UTC -5)