Oldřich Fridrich's community posts
Host/Agent for Linux (alpha preview)
Oldřich Fridrich,
User (Posts: 11)
Mar 16, 2023 1:00:03 pm EDT
Support level: Pro
Heloo,
thank you for the quick reply. So I'll wait :-)
Good luck in your work and may you be successful...
thank you for the quick reply. So I'll wait :-)
Good luck in your work and may you be successful...
Host/Agent for Linux (alpha preview)
Oldřich Fridrich,
User (Posts: 11)
Mar 16, 2023 9:13:07 am EDT
Support level: Pro
Hello,
I wanted to ask if you have at least an approximate idea of when the Host/Agent for linux might be released.
Thank you for answer
I wanted to ask if you have at least an approximate idea of when the Host/Agent for linux might be released.
Thank you for answer
Host/Agent for Linux (alpha preview)
Oldřich Fridrich,
User (Posts: 11)
Mar 13, 2023 4:51:06 pm EDT
Support level: Pro
Hello,
Thank you for your kindness and cooperation :-)
Thank you for your kindness and cooperation :-)
Host/Agent for Linux (alpha preview)
Oldřich Fridrich,
User (Posts: 11)
Mar 11, 2023 3:59:12 pm EST
Support level: Pro
The problem when writing text on a remote computer (as I described earlier) occurs at any time - it is not just a specific text editor, but when writing any text. But now I noticed that when writing text, vertical lines are inserted between letters, but at the same time there is some refresh of the remote image (I don't know what causes this refresh of the image) and the displayed text is gradually cleaned fr om the inserted vertical lines and is displayed normally. For example, as soon as I finish writing a sentence, I end the sentence with a period. Within a few seconds, the text is displayed correctly and normally.
This "strange" behavior is rather annoying, it enables work on a remote machine, only the text writing is a bit confusing.
I made a video of what it looks like when writing text remotely. Since I could not insert the video as an attachment, I am sending you a link from wh ere you can download the video.
http://www.uschovna.cz/zasilka/HYKA9GLA98UBZ5E5-ICI
Thank you
The machines on which I test after locating the Host/Agent for Linux (alpha preview) network are:
**************************************
PC
******
System:
Host: AMD Kernel: 5.15.0-67-generic x86_64 bits: 64 Desktop: Cinnamon 5.6.7
Distro: Linux Mint 21.1 Vera
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: PRO B460M-C v: Rev 1.xx serial: <superuser required>
BIOS: American Megatrends v: 1603 date: 02/02/2021
CPU:
Info: 6-core model: Intel Core i5-10400F bits: 64 type: MT MCP cache:
L2: 1.5 MiB
Speed (MHz): avg: 1364 min/max: 800/4300 cores: 1: 800 2: 800 3: 800
4: 800 5: 800 6: 800 7: 1113 8: 1200 9: 3482 10: 4182 11: 800 12: 800
Graphics:
Device-1: NVIDIA GK104 [GeForce GTX 770] driver: nvidia v: 470.161.03
Display: x11 server: X.Org v: 1.21.1.3 driver: X: loaded: nvidia
unloaded: fbdev,modesetting,nouveau,vesa gpu: nvidia
resolution: 1920x1080~60Hz
OpenGL: renderer: NVIDIA GeForce GTX 770/PCIe/SSE2
v: 4.6.0 NVIDIA 470.161.03
******************************************
Notebook
*********
System:
Host: DELLI7000G Kernel: 5.15.0-67-generic x86_64 bits: 64 Console: pty pts/1
Distro: Linux Mint 21.1 Vera
Machine:
Type: Laptop System: Dell product: Inspiron 15 7000 Gaming v: N/A serial: <superuser required>
Mobo: Dell model: 0TXG2N v: A00 serial: <superuser required> UEFI: Dell v: 1.15.0
date: 08/30/2021
Battery:
ID-1: BAT0 charge: 46.2 Wh (90.4%) condition: 51.1/74.0 Wh (69.1%)
CPU:
Info: quad core model: Intel Core i5-7300HQ bits: 64 type: MCP cache: L2: 1024 KiB
Speed (MHz): avg: 800 min/max: 800/3500 cores: 1: 800 2: 800 3: 800 4: 800
Graphics:
Device-1: Intel HD Graphics 630 driver: i915 in: kernel
Device-2: NVIDIA GP107M [GeForce GTX 1050 Mobile] driver: nvidia v: 515.86.01
Device-3: Microdia Integrated_Webcam_HD type: USB driver: uvcvideo
Display: server: X.org v: 1.21.1.3 with: Xwayland v: 22.1.1 driver: X:
loaded: modesetting,nvidia unloaded: fbdev,nouveau,vesa gpu: i915 tty: 136x36
resolution: 1920x1080
Message: GL data unavailable in console. Try -G --display
**********************************
This "strange" behavior is rather annoying, it enables work on a remote machine, only the text writing is a bit confusing.
I made a video of what it looks like when writing text remotely. Since I could not insert the video as an attachment, I am sending you a link from wh ere you can download the video.
http://www.uschovna.cz/zasilka/HYKA9GLA98UBZ5E5-ICI
Thank you
The machines on which I test after locating the Host/Agent for Linux (alpha preview) network are:
**************************************
PC
******
System:
Host: AMD Kernel: 5.15.0-67-generic x86_64 bits: 64 Desktop: Cinnamon 5.6.7
Distro: Linux Mint 21.1 Vera
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: PRO B460M-C v: Rev 1.xx serial: <superuser required>
BIOS: American Megatrends v: 1603 date: 02/02/2021
CPU:
Info: 6-core model: Intel Core i5-10400F bits: 64 type: MT MCP cache:
L2: 1.5 MiB
Speed (MHz): avg: 1364 min/max: 800/4300 cores: 1: 800 2: 800 3: 800
4: 800 5: 800 6: 800 7: 1113 8: 1200 9: 3482 10: 4182 11: 800 12: 800
Graphics:
Device-1: NVIDIA GK104 [GeForce GTX 770] driver: nvidia v: 470.161.03
Display: x11 server: X.Org v: 1.21.1.3 driver: X: loaded: nvidia
unloaded: fbdev,modesetting,nouveau,vesa gpu: nvidia
resolution: 1920x1080~60Hz
OpenGL: renderer: NVIDIA GeForce GTX 770/PCIe/SSE2
v: 4.6.0 NVIDIA 470.161.03
******************************************
Notebook
*********
System:
Host: DELLI7000G Kernel: 5.15.0-67-generic x86_64 bits: 64 Console: pty pts/1
Distro: Linux Mint 21.1 Vera
Machine:
Type: Laptop System: Dell product: Inspiron 15 7000 Gaming v: N/A serial: <superuser required>
Mobo: Dell model: 0TXG2N v: A00 serial: <superuser required> UEFI: Dell v: 1.15.0
date: 08/30/2021
Battery:
ID-1: BAT0 charge: 46.2 Wh (90.4%) condition: 51.1/74.0 Wh (69.1%)
CPU:
Info: quad core model: Intel Core i5-7300HQ bits: 64 type: MCP cache: L2: 1024 KiB
Speed (MHz): avg: 800 min/max: 800/3500 cores: 1: 800 2: 800 3: 800 4: 800
Graphics:
Device-1: Intel HD Graphics 630 driver: i915 in: kernel
Device-2: NVIDIA GP107M [GeForce GTX 1050 Mobile] driver: nvidia v: 515.86.01
Device-3: Microdia Integrated_Webcam_HD type: USB driver: uvcvideo
Display: server: X.org v: 1.21.1.3 with: Xwayland v: 22.1.1 driver: X:
loaded: modesetting,nvidia unloaded: fbdev,nouveau,vesa gpu: i915 tty: 136x36
resolution: 1920x1080
Message: GL data unavailable in console. Try -G --display
**********************************
Host/Agent for Linux (alpha preview)
Oldřich Fridrich,
User (Posts: 11)
Mar 09, 2023 1:35:05 pm EST
Support level: Pro
Hello,
it happens in both modes - normal view and stretch view. There is one more interesting thing. When I press enter while writing text and the cursor jumps to the next line, the vertical dashes between the letters disappear. Or when I write text, there are vertical dashes between the letters and just move the cursor outside the window of the written text, the dashes disappear immediately.
it happens in both modes - normal view and stretch view. There is one more interesting thing. When I press enter while writing text and the cursor jumps to the next line, the vertical dashes between the letters disappear. Or when I write text, there are vertical dashes between the letters and just move the cursor outside the window of the written text, the dashes disappear immediately.
Host/Agent for Linux (alpha preview)
Oldřich Fridrich,
User (Posts: 11)
Mar 08, 2023 8:13:14 am EST
Support level: Pro
Hello,
I don't know if it is completely related to Host/Agent for Linux (alpha preview), but when connecting remotely, vertical commas are inserted in the menu of letters on the remote desktop when writing text... see. attached image
Thanks
Have a nice day
O.Fridrich - Czech Republic
I don't know if it is completely related to Host/Agent for Linux (alpha preview), but when connecting remotely, vertical commas are inserted in the menu of letters on the remote desktop when writing text... see. attached image
Thanks
Have a nice day
O.Fridrich - Czech Republic
Host/Agent for Linux (alpha preview)
Oldřich Fridrich,
User (Posts: 11)
Mar 07, 2023 7:38:50 am EST
Support level: Pro
Hello,
I understand that some functions are not in the Alpha-version... I didn't mean it as a criticism, just an information about the fact and the functionality. And I have to agree with Jim about the scrolling. You can use the mouse to scroll on the remote machine, when using the touchpad, scrolling on the remote machine does not work... I believe that in the final version all the standard functions will work and maybe something extra... :-))
Thanks
Have a nice day
O.Fridrich - Czech Republic
I understand that some functions are not in the Alpha-version... I didn't mean it as a criticism, just an information about the fact and the functionality. And I have to agree with Jim about the scrolling. You can use the mouse to scroll on the remote machine, when using the touchpad, scrolling on the remote machine does not work... I believe that in the final version all the standard functions will work and maybe something extra... :-))
Thanks
Have a nice day
O.Fridrich - Czech Republic
Host/Agent for Linux (alpha preview)
Oldřich Fridrich,
User (Posts: 11)
Mar 06, 2023 2:28:16 pm EST
Support level: Pro
Hello,
I found one drawback so far:
The ability to scroll content on the remote machine does not work, neither with the mouse nor with the touchpad. Dragging with the scroll bar or clicking on the scroll bars must be used when scrolling remote content.
Have a nice day
O.Fridrich - Czech Republic
I found one drawback so far:
The ability to scroll content on the remote machine does not work, neither with the mouse nor with the touchpad. Dragging with the scroll bar or clicking on the scroll bars must be used when scrolling remote content.
Have a nice day
O.Fridrich - Czech Republic
Host/Agent for Linux (alpha preview)
Oldřich Fridrich,
User (Posts: 11)
Mar 04, 2023 6:02:59 pm EST
Support level: Pro
Hello,
I tried the new Host/Agent for Linux (alpha preview) - connection from a machine with Viewer (OS linux) to a machine with the new Host/Agent for Linux (alpha preview) (OS linux) - "heureka" remote control finally works after three years purchase of a license :-) so far only via IP address, later it will perhaps be possible to connect via Internet-ID. I will try the remote connection with this version of Host/Agent for Linux (alpha preview) and I will send you any findings of the connection status, etc.
So it looks like we will probably see a functional Viewer and Host for both Mac and Linux :-)
Thank you for your efforts, efforts and progress to solve the possible remote control of Mac and Linux machines.
Have a nice day
O.Fridrich - Czech Republic
I tried the new Host/Agent for Linux (alpha preview) - connection from a machine with Viewer (OS linux) to a machine with the new Host/Agent for Linux (alpha preview) (OS linux) - "heureka" remote control finally works after three years purchase of a license :-) so far only via IP address, later it will perhaps be possible to connect via Internet-ID. I will try the remote connection with this version of Host/Agent for Linux (alpha preview) and I will send you any findings of the connection status, etc.
So it looks like we will probably see a functional Viewer and Host for both Mac and Linux :-)
Thank you for your efforts, efforts and progress to solve the possible remote control of Mac and Linux machines.
Have a nice day
O.Fridrich - Czech Republic
Host and Agent availability for Linux and Mac
Oldřich Fridrich,
User (Posts: 11)
Mar 23, 2020 9:04:09 am EDT
Support level: Pro
Hello,
thank you for your reply, i will try to hold on and wait for your product. If it works from across operating systems, I would buy a PRO version from you - no limits to Endpoints per tech. Perhaps it won't take long.
Good luck and success in your valuable work and meritorious work.
O.Fridrich
thank you for your reply, i will try to hold on and wait for your product. If it works from across operating systems, I would buy a PRO version from you - no limits to Endpoints per tech. Perhaps it won't take long.
Good luck and success in your valuable work and meritorious work.
O.Fridrich