A Step by Step Approach to Building a Network for your Business

So you’ve decided to take the jump and set up your own network for your business. This is an essential step in forming or improving any business, since so much work is now done away fr om the office. There are a lot of potential pitfalls that you need to be aware of, but these can be bypassed with some careful planning. Presented below are some simple decision you should make to ensure that you establish the most effective business network possible.

Wired or Wireless?

Whether you choose a wired network wh ere the computers are connected directly to a router via Ethernet cable or a wireless network that uses Wi-Fi connectivity is largely a question of how your office area is set up. For traditional offices that have desktop computers and plenty of space to run cables, having a wired option is probably a good idea. This allows you to have the best speed and reliability possible. If you have employees using laptops or notebooks to connect to the network, however, a wireless choice will allow them the chance to move freely without being anchored to any one point. A combination can also be used, using wired setups for desktops and wireless for traveling employees.


An Introductory Road Map to IP Addresses

When you get a letter in the mail, how do you know it was intended for you? The answer, of course, is because it is addressed to you. Computers have addresses as well, known as Internet Protocol addresses or simply IP addresses. Knowing how to use an IP address is a key component to being able to effectively navigate the Internet. By managing your own IP, you can determine who has access to your machine and much more.

The TCP/IP Protocol

The heart of a computer’s ability to navigate the Internet and receive information is the Transmission Control Protocol, or TCP. The TCP/IP protocol forms the standard of all online communication. TCP is used to connect to servers on the Internet and is essential to being able to send data. Meanwhile, IP serves as the unique identifier for your individual computer and is essential to being able to receive information fr om other sources. Your IP address comes in one of two different forms: IP Version 4, or IPv4, and IP Version 6, or IPv6. All computers have at least an IPv4 address, and many computers are now using an IPv6 address as well. The difference between them boils down to a matter of complexity.


Exploring the Basics of DNS

What’s in a name? In the case of DNS, the answer is quite a bit. DNS, or Domain Naming System, is one of the basic building blocks of the online world. This naming system allows a computer to be identified by other machines, which is essential to web based communications. Most systems automatically set a DNS, but there are advantages to knowing more about it and being able to customize the system for your own purposes. Read on to find out more.

The Phone Book of the Internet

Many people refer to DNS as the phone book of the Internet, because that is essentially what it is. If a site’s public IP address serves as its phone number, its DNS name is the actual phonebook listing. To clarify, every website out there has a public IP address. This is usually represented by four sets of numbers separated by dots, such as In fact, if you type in “http://” followed by the IP address into your browser’s navigation bar, you will land at that site just as though you had entered its domain name. However, most people remember names better than numbers, so it’s easier and more effective for a company to use a memorable domain name rather than the public IP address.


Wake on LAN Network Options: A Great Remote Solution

What do you do when you need to turn on a computer at a remote site that’s been shut down? You could call somebody on site, but that only works if they’re actually there. If you need access to a computer on off hours, during the weekend, or in another situation where having somebody turn it on for you is inconvenient or impossible, there is a simple solution. This solution is called Wake on LAN, and it is an effective way to improve your remote access abilities.

What is Wake on LAN?

If you have a Wake on LAN adapter on your network router, that means that you can remotely turn on any computer that you have set to work with the adapter. The network reads an incoming ping from a remote computer and then executes a command to start the sel ected computer. This turns on the computer but doesn’t execute any other operations. When doing work on a network or making software upgrades, you will usually only need to have the remote computer turned on in order to perform whatever tasks you have scheduled. If you have something more complex in mind, you might need to log in to the newly awakened computer remotely in order to perform the tasks you need to do.


This website uses cookies to improve user experience. By using this website you agree to our Terms of Service and Privacy Policy.